for Samsung TV Fan KDB04112HB UE55HU8500T UE55HU8500 UE55HU8500TXXU UN55HU8550F UN55HU9000F UE55HU7500 UA55JS9800 UA65JS9800 Cooling Fan

Purchased to replace fan in my Samsung One Connect box. The fan casing is a perfect match, screw holes are in the same places as the original. The cable length was significantly longer than the original fan, but can simply be rolled up as there was ample room in the One Connect box. If there wasn't room, could simply shorten the wires by cutting and splicing back together. The one issue though is that the pin connector did not match the original. The original had a 4 pin connector, though only three wires. The KIKIFAN replacement had 3 wires as well, but only a 3pin connector. To resolve, I had two options. One option would have been to just cut the wires on both the original and the replacement and swap and splice the original connector to the new fan. The second option, which I chose to do was to just insert the replacement connector, making sure I was aligning the correct 3 pins. One additional note on the pins is that the wiring was backwards, at least based on the color of the wires, so I had to install the connector backwards, basically not using the clip, which I couldn't clip anyway since I was fitting a 3 pin connector into a 4 pin slot. I think it may have been "cleaner" if I had cut the wires to both shorten the length and swap the connector, but hesitated since it would have made the fan non-returnable if it didn't work. So far so good, no more fan warnings when I turn on the TV. The fan is fairly quiet, but I can hear it working if I put my ear next to the One Connect box. Replacing the fan was far easier than I had expected.

I kept getting a fan error message. But thanks to Google and Amazon I found the perfect part and replaced the fan on my own! Works like a dream!

Perfect fit

Like another review on here has already pointed out - this fan has only a 3 prong instead of a 4 prong clip. Also, the wire clip is set up backwards the way it has been wired and configured.

Great fit for my 2016 Samsung curved tv One Connect box. No more warning on screen that tv was overheating and shutting off. Just make sure to connect new fan wiring harness to the same 3 pins with wiring color sequence as OEM fan. You’ll be good to go.

As others have mentioned wires are reversed and only 3 pin versus 4. Kind of odd the part number was exact match as old one, I suspect its a "custom printed label".. :)

I WAS CONSTANTLY GETTING NOTIFICATIONS THAT MY TV WAS OVER HEATING AND IT WAS BEING SHUT DOWN. I GOT THE PART NUMBER OF THE FAN AND FOUND IT SURPRISINGLY EASY TO INSTALL. PROBLEM SOLVED - WORKS GREAT.

Not a great product experience. I read carefully for compatibility with my Samsung One Connect box and fan model, but the fan connector and wiring is different than the original. The wires are in reverse order, and this fan came with a 3-pin connector rather than 4. I could see that the original 4 pin connector has an empty pin, so it is actually a 3 wire fan, so i tried clicking it into place but it didn’t turn on. Finally i saw that the wires were backwards so i tried turning it around. The lever lock no longer holds onto anything, but it *did* slide into place and the fan *does* now work. I’d rather have gotten a fan that is more straightforwardly compatible, especially for twenty bucks! I think it’s likely that any 3 wire fan would do the trick.