Pro-LifT G-737 Grey Speedy Lift Garage Jack - 3-1/2 Ton Capacity

If you're a homeowner that needs something tough that doesn't break the bank, this floor jack is for you. I'm not a professional mechanic and know very little about cars, but I decided to take seriously the tire rotation of our cars, and that's why I bought this floor jack. This thing is a monster compared to the 2-Ton floor jack I previously bought and had to return because it wasn't high enough to lift our 2017 Nissan Murano. With this Pro-LifT G-737 floor jack, 6 pumps (not even half way its max height) on that thing and the car is lifted, slide in the Pro-LifT stand, release and repeat. The release system is great. Just twist the handle to the Left and the lift arm comes down. The best thing about the release system is that you can be very gentle and slowly turn the handle until you reach that point where the car starts coming down VERY slow. I hate repair shops where they just slam the car down. Now I have control and can take my time lowering my car. It's actually very satisfying to see the car slowly come back down :P This jack is quite heavy, but at the same time very easy to maneuver. Unlike many other floor jacks, the saddle (round part that makes contact with your vehicle) has a rubber piece, and that's great because it helps protect your car. However, the rubber piece only covers the middle and the metal area/edges of the saddle are exposed. So I recommend you get a Floor Jack Rubber Pad. I got this one: https://www.amazon.com/gp/product/B07V32536W/ -- It just on the saddle, it doesn't "snap" on it or anything, it just sits lose. Very happy with this Pro-LifT G-737 floor jack.

Guys, I have a 5,600 square foot ultimate man-cave shop. We jeep. We have heavy equipment. We off road. We do 100% of our own vehicle and machinery maintenance, from oil changes and brake jobs to complex drivetrain overhauls. A good floor jack is essential to life here at the Bat Cave. From one nerdy tool-junkie to the next, THIS is a jack worth having. In fact - and if your testosterone levels allow - I'd buy two. I know I did. They're extremely well built, I'd reckon near indestructible. They have the perfect balance of a low-profile-high-lift design. The freaking speed at which these jacks get on mission is so impressive, and their lift capacity is amazing. Ok, I'm done now. Do yourself and your manhood a favor and order a pair of these behemoths for your shop. You will not be disappointed.

Rapid lift vs pump, easily handled height and weight for my truck and sxs. Great value for the money, and performs between a pro jack and a HF special. It’s a solid choice for someone just above a weekend warrior who doesn’t want to spend professional level money

Worked exactly as advertised. Lifted my LR3 SUV with little effort. Solid construction and easy to maneuver and the long handle makes it very easy to use.

Nowhere in the directions does it tell you whether not to released the jack is. That night also needs to be turned tight to jack it up, so it's an important thing.. that nut that you need to twist is located where the jack bar goes ... So, look at the end of the jack bars and find the square end, that slips into where you jacked it up and down, you then need to twist it to jack it up and once it's up you want to come down you twist it the other way to come down. Simple if they would have told you where it's located. Other than that it seems like it's a good Jack Hope it lasts I think they call it a 3/4 ton jack because it's so so so heavy and feels like it weighs 3/4 of a ton ha ha ! 😀 Would buy again....

I'm able to jack up the entire front end, back end, or side no problem. It goes plenty high, way higher than what my 3-ton jack stands can reach (bigger beefier 6-ton Pro-Lift jack stands are on my list). I can get my truck all the way up in 2-3 full pumps. It is steel so it's heavy and takes a bit of effort to maneuver, but I do feel more secure with the weight and mass. Before I was using a rinky-dink bottle jack that took forever and wore me out, so this is something that really takes a lot of work out of bigger jobs. I followed the instructions and bled the reservoir before using, seemed easy enough. The package came in good condition.

This thing is solid. It arrived 6 days earlier than was stated, love that. The box was not ripped or damaged in any way. It looked like it came right off the shelf. I feel bad for the Fed Ex guy, as I was napping when it came. Poor guy had to carry this thing by himself. My wife was interested in how it differed from my smaller floor jack. I put it together and raised the back of her car in about 6 minutes, fro box to lift. That is what I am looking for. If anything changes with this jack I'll update my review. Until then, this thing is great.

- ill update my review every 2 months on these jacks for the next 2 times(4 months total) - So far the jacks seem very high quality and boxes we're not damaged. - everything was tight when it came, that we could tell so far. - jack lifts really fast...(gets a car up in 4 pumps) - ill update my review around 8/20/2020 be sure to tune in - these jacks are 3.5 ton rated.

Arrived fast and works like a charm, its actually much heavier duty than I had expected, very happy with the purchased

The jack is very heavy but it works good for car and SUV

Utilisé pour soulever fréquemment les deux roues avant d'un vehicule lorsque le travai exige de manipulations sous le capot et sous le véhicule en alternance. Mon dernier appareil utilisé en ce sens s'est tordu et a décroché sans avertissement lorsque l'unique tige d'acier latérale a cédé. Ce Pro-Lift g-737, capacité 3–1/2 tonnes fait le travail sécuritairement et soulève facilement les loudes charges, ce qui n'est pas surprenant compte tenu du poids de l'outil et de la présence de deux deux tiges latérales qui stabilisent la charge soulevée. De plus le manche est utilisé pour rabaisser le vehicule au sol, ce qui est un avantage certain et facilite le travail.

Tout à fait conforme à mes attentes, sauf qu' il est vraiment plus lourd que ce à quoi je m'attendais (manipulation plus difficile sur plancher irrégulier ).

J’ai acheté ce produit pour changer les pneus de mes deux autos électriques. Je vais sauver au moin 200$ par année et mon investissement se paye en un an . Un beau gros rond pour soutenir l’auto et assez fort pour lever sans problème sans forcer avec le long levier . Très robuste et assez pesant aussi . Je le recommande. Livraison rapide, merci !