Thermo Scientific ELED FB1415M Thermolyne Small Benchtop Muffle Furnace with Digital Single Setpoint Temperature Controller, 120V, 2.1 Liter Capacity, 100 to 1100 Degree C

• Benchtop muffle furnace with 2.1 L (0.07 cubic foot) heating area capacity for general laboratory use.
• Temperature range of 100 to 1,100 degrees C for laboratory heating applications such as ashing, heat treating, ignition testing, gravimetric analysis, and determination of volatile and suspended solids.
• Single-setpoint digital temperature controller for setting and holding a target temperature.
• Three embedded heating elements on furnace top and both sides for fast and even heating.
• Thermal-efficient ceramic fiber insulation surrounds chamber for heat loss reduction and energy efficiency.

The Thermo Scientific FB1415M Thermolyne Small Benchtop Muffle Furnace has a single-setpoint digital controller, 2.1 L (0.07 cubic foot) heating area capacity, and a temperature range of 100 to 1,100 degrees C for general laboratory use. Three embedded heating elements on the furnace top and sides provide fast and even heating. Thermal-efficient ceramic fiber insulation reduces heat loss and enhances energy efficiency. A 0.95 cm (0.38") diameter port at the rear of the furnace allows an independent temperature monitoring device to check internal temperature measurements. The furnace has an LED display that shows the chamber temperature as the unit heats, and the setpoint temperature can be checked. The front door drops down when opened, which vents heated air up and away from the operator, and allows the door to be used as a shelf when loading and unloading the furnace. This furnace is designed for laboratory-heating applications such as ashing and in samples, heat treating, gravimetric analysis, and the determination of volatile and suspended solids. The Thermo Scientific FB1415M includes a single-setpoint digital controller, which sets a single temperature that the furnace will heat to and hold, until it is turned off. Safety features include a door safety switch which turns off the heating elements when the door is opened, and sensor break protection, which turns power off in the event of thermocouple failure. The furnace controller also includes a self-tuning feature. Self-tuning changes the control parameters to ensure temperature accuracy for a particular material type (load) and setpoint. The furnace is Canadian Standards Association (CSA) approved. The thermocouple, line cord, and plug are included. Specifications -------------- Capacity (heating area) 2.1 L (0.07 cubic feet) Temperature range 100 to 1,100 Degrees C Electrical requirements 120V 50/60 Hz Power consumption 1,450 watts Weight 12.7 kg (28 lb.) Interior dimensions 10.8 x 12.7 x 15.2 cm/4.25 x 5 x 6 inches (H x W x D) Exterior dimensions 37 x 25 x 40 cm/14.5 x 10 x 15.8 inches (H x W x D) Temperature tolerance range +/- 0.5 degrees at 1,000 degrees C Temperature uniformity +/- 5 degrees at 1,000 degrees C Standards met CSA Manufacturer's warranty 12 months H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Laboratory furnaces are used for heating applications that require a range of high temperatures. They heat to high temperatures evenly and maintain consistent temperatures, while providing an environment free of undesirable contaminants and moisture. Factors such as object size, controllers, temperature range, and shape determine the uses of particular furnaces. Most furnaces have digital controllers that determine how fast they heat up (ramp), how long the temperature can be held (dwell), and how fast they cool down. Safety systems are included in most furnaces to prevent overheating the contents, as well as the furnace itself. Laboratory furnaces are used in applications such as petroleum analysis, analysis of certain compounds, and heat-treating small steel parts. Thermo Fisher Scientific manufactures analytical instruments, laboratory equipment, consumables, and software under the Thermo Scientific and Fisher Scientific brands, among others. The company was founded in 2006 and is headquartered in Waltham, MA. What’s in the Box? * FB1415M Thermolyne Small Benchtop Muffle Furnace with Single Setpoint Digital Temperature Controller * Thermocouple * Line cord * Plug * Instructions